background image

2

TABLE OF CONTENTS

Content

Page

Important Safe Operation Practices................................................................... 3

Assembling Your Yard Vacuum ......................................................................... 5

Know Your Yard Vacuum................................................................................... 7

Operating Your Yard Vacuum ............................................................................ 8

Maintaining Your Yard Vacuum ......................................................................... 10

Troubleshooting ................................................................................................. 13

Parts List............................................................................................................ 14

FINDING MODEL NUMBER

This Operator’s Manual is an important part of your new Yard Vacuum. It will help you assemble, prepare 
and maintain the unit for best performance. Please read and understand what it says. 

Before you start assembling your new equipment, please locate the model plate on the 
equipment and copy the information from it in the space provided below. The information on 
the model plate is very important if you need help from our Customer Support Department or 
an authorized dealer. 

You can locate the model number by looking down at the rear of the Yard Vacuum. A sample model 
plate is explained below. For future reference, please copy the model number and the serial number 
of the equipment in the space below.

ENGINE INFORMATION

The engine manufacturer is responsible for all engine-related issues with regards to performance, power-
rating, specifications, warranty and service. Please refer to the engine manufacturer’s Owner’s/Operator’s 
Manual packed separately with your unit for more information.

CALLING CUSTOMER SUPPORT

Please do NOT return the unit to the retailer from which it was purchased, without first contacting Customer Support.

Should you have difficulty assembling this product or have any questions regarding the controls, operation 
or maintenance of this unit, please call the Customer Support Department. 

 

Call 1- (330) 220-4MTD (4683) or 1- (800)-800-7310 to reach a Customer Support 
representative. Please have your unit’s model number and serial number ready when you 
call. See previous section to locate this information. You will be asked to enter the serial 
number in order to process your call.

www.yardman.com

MTD  LLC
P. O. BOX  361131
CLEVELAND,OH 44136
330-220-4683
800-800-7310

Copy the model number here:

Copy the serial number here:

(Model Number)

(Serial Number)

For more details about your unit, visit our website at www.yardman.com   

            

Summary of Contents for 24A-061I401





















Reviews: