background image

2

TABLE OF CONTENTS

Content

Page

Maintaining Safety ............................................................................................. 3

Slope Gauge...................................................................................................... 6

Assembling Your Lawn Mower........................................................................... 7

Know Your Lawn Mower .................................................................................... 8

Operating Your Lawn Mower ............................................................................. 9

Making Adjustments .......................................................................................... 11

Maintaining Your Lawn Mower........................................................................... 12

Troubleshooting ................................................................................................. 15

Parts List ............................................................................................................ 16

FINDING MODEL NUMBER

This Operator’s Manual is an important part of your new lawn mower. It will help you assemble, prepare and 
maintain the unit for best performance. Please read and understand what it says. 

Before you start assembling your new equipment, please locate the model plate on the 
equipment and copy the information from it in the space provided below. The information on the 
model plate is very important if you need help from our Customer Support Department or an 
authorized dealer. 

You can locate the model number by looking down at the rear of the deck. A sample model plate is 
explained below. For future reference, please copy the model number and the serial number of the 
equipment in the space below.

CALLING CUSTOMER SUPPORT

If you have difficulty assembling this product or have any questions regarding the controls, operation or 
maintenance of this unit, please call the Customer Support Department. 

Call 1- (330) 220-4MTD (4683) or 1- (800)-800-7310 to reach a Customer Support 
representative. Please have your unit’s model number and serial number ready when you 
call. See previous section to locate this information. You will be asked to enter the serial 
number in order to process your call.

MTD PRODUCTS INC

CLEVELAND, OHIO  44136

Copy the model number here:

Copy the serial number here:

(Model Number)

(Serial Number)

For more details about proper lawn care, visit our website at www.mtdproducts.com               

Summary of Contents for 810 Series





















Reviews: