![background image](http://html1.mh-extra.com/html/yard-force/yf22-2n1/yf22-2n1_operators-manual_905817009.webp)
9
Hotline: 1-866-902-9690
TECHNICAL SPECIFICATIONS
Engine type
Single cylinder 4-stroke
Engine displacement
140cc
Engine speed
3100±100 RPM
Cutting path
21” (53 cm)
Height adjustments
1.25 " ~ 3.75", 5 positions
Front wheel diameter
7" (178mm)
Rear wheel diameter
11"(280mm)
Ignition
TCI
TECHNICAL SPECIFICATIONS
CAUTION!
Read complete INSTRUCTION MANUAL before operating this machine.
IMPORTANT!
THIS LAWN MOWER IS SHIPPED WITHOUT OIL OR GASOLINE IN THE ENGINE.
Your new lawn mower has been assembled at the factory with the exception of those parts left
disassembled for shipping purposes. All parts, such as nuts, washers, bolts, etc., necessary to complete the
assembly have been placed in the parts bag. To ensure safe and proper operation of your lawn mower, all
parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure
proper tightness.
TO REMOVE LAWN MOWER FROM CARTON
1. Remove loose parts included with mower.
2. Cut down two end corners of carton and lay end panel down flat.
3. Remove all packing materials except padding between upper and lower handle and padding holding
control bars to upper handle.
4. Roll lawn mower out of carton and check carton thoroughly for additional loose parts.
ASSEMBLING THE HANDLE
IMPORTANT:
Unfold handle carefully to avoid pinching or damaging the control cable.
1. Lift the rear of the deck and place it on a block of wood (not supplied) to secure it.
2. Place the lower handle over the deck and align the holes on the deck with the corresponding holes on
the handle.
3. Secure the lower handle to the deck using the handle knob and bolt (supplied). See Fig. 3.
ASSEMBLY
Handle knob and bolt
Fig. 3