manualshive.com logo in svg

Yard force YF1601, Operating Manual

Share
Download
Yard force YF1601 Operating Manual Download Page 4

3

DESCRIPTION OF PRODUCT PARTS

Check the delivery parts

As shown in Fig 2     

Carefully remove the machine from its packaging and check as the following parts are 
complete:

Fig. 2

B

A

C

D

J

E

I

F

G

H

A. 

Main mower deck (with upper handle)    1pc

B. 

Grass bag assembly    1pc

C. 

Star fixing knob with M8 nut 4pcs

D. 

Cup head square neck bolts M8X45 2pcs

E. 

spark plug spanner    1set

F. 

Lower handle with rope guide    1pc

G. 

Lower handle    1pc

H. 

Cable clip   1pc

I. 

Manual    1pc

J. 

Arc-head blot M8X35

WARNING:

 If any parts are damaged or missing, do not operate this tool until the 

missing parts are replaced. Failure to heed this warning could result in serious 
personal injury.

NOTE! 

Always recycle the packaging in accordance with local recycling schemes.

WARNING! 

This item requires a two person lift to remove from the packaging. 

Make sure that you have sufficient space to put the lawn mower down. Keep your 
feet apart so that you have a stable position, bend at the knees and keep your 
back straight.

Summary of Contents for YF1601


























Reviews:

No comments

Brands by name

Popular brands

Load more brands