6
7
GB
GB
GENERAL SAFETY WARNINGS
WARNING!
This machine can cause serious injuries. Follow
instructions below to reduce risk of accident and
injury.
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
PREPARATION
• Read the instructions carefully and make sure you
understand them fully. Be familiar with the controls and
the proper use of the machine.
• Never allow children, persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge or people unfamiliar with these instructions
use the machine.
• Local regulations may restrict the age of the operator.
Children should be supervised to ensure that they do not
play with the appliance.
• The operator or user is responsible for accidents or
hazards occurring to other people or their property.
• Ensure the correct installation of the perimeter boundary
system as instructed.
• Periodically inspect the area where the machine is to
be used and remove all stones, sticks, wires, and other
debris which could cause damage to the machine or be
unsafe.
• Periodically visually inspect to see that the blades, blade
bolts and cutter assembly are not worn or damaged.
Replace worn or damaged blades and bolts in sets to
preserve balance.
• On multi-spindle machines, take care as rotating one
blade can cause other blades to rotate.
• Never leave the machine to operate unattended,
especially while other people such as children and pets
are in the area.
• Never use the machine to level out uneven patches.
• If the blades no longer cut correctly or if the motor is
overloaded, check all the parts of your equipment and
replace the worn parts. If a more extensive repair is
required, contact the customer service centre.
USE
• Do not put hands or feet near or under rotating parts.
• Never pick up or carry the machine while the motor is
running.
• Remove the plug from the mains or remove the disabling
device:
– before clearing any blockages.
– before checking, cleaning or maintaining the machine.
– after striking a foreign object to inspect the machine for
damage.
– if the machine starts to vibrate abnormally, and to
check for damage before restarting.
• Start Robotic Mower according to the instructions. When
the main power switch is in the ON position, make sure
you keep your hands and feet away from the rotating
blades.