18
19
DESCRIPTION OF PRODUCT
Dimension
Assembled Length
1635 mm
Assembled Height
1168 mm
Assembled Width Without Discharge Deflector
1035 mm
Net Weight
210 kg
Mower & Deck
Pneumatic Tyre Sizes
380 x 153 x 153mm Front
406 x 165 x 203 Rear
Cutting Width
96 cm
Blade Cutting Diameter
49 cm
Number Of Blades
2
Number Of Deck Wheels
2
Cold Tyre Pressure
1.4 bar
Blade Speed
3500 rpm
Deck Lift System
Hand operation
Minimum Cutting Height
38 mm
Maximum Cutting Height
114 mm
Number of Cutting Height Positions
12
Battery
Battery Type
lithium
Battery Voltage (V)
56
Battery Amp Hours (Ah)
50
Charge Time (hours)
6.25
Charge Cycle (Minimum 80% remaining capacity)
3000
Charger and Mower Operating Temperatures
5~40°C
Charger
Type
input:100~240V,50~60HZ;
Output: 57.6V DC, 8A
Performance
Maximum Forward Speed
Driving,12.9 km/h
Mowing, 8 km/h
Maximum Reverse Speed
4.8 km/h
Noise
Measured sound pressure level(L
PA
)
xxxxx
Measured sound power level(L
wA
)
xxxxxx
Guaranteed sound power level
100 dB(A)
TECHNICAL DATA
The declared vibration total value and the declared noise emission values have
been measured in accordance with a standard test method (EN62841) and may be
used for comparing one tool with another. The declared vibration total value may
also be used in a preliminary assessment of exposure.
Warning!
The vibration and noise emission during actual use of the power tool can differ
from the declared total value depending on the ways in which the tool is used, in
particular, what kind of work piece is machined.
It is necessary to identify safety measured to protect the operator that are based
on an estimation of exposure in the actual conditions of use (taking account of all
parts of the operating cycle such as the times when the tool is switched off and
when it is running idle in addition to the trigger time)
Try to minimize the impact of vibration and noise. Exemplary measures to reduce
vibration exposure include wearing gloves while using the tool, limiting working
time, and using accessories in good condition.
TECHNICAL DATA
Washer (E)
Washer (D)
Spring (C)
Bolt with spring washer (F)
x2
Flange Nut
x3
(A)
Bolt (B
x4
x1
)
x1
x1