16
17
Parts description (Fig. A)
1. Rubber cap
2. Tool holder
3. Worklight
4. ON/OFF trigger
5. Battery pack release button
6. Battery pack
7. Touch Panel (Forward/ reverse)
Delivery contents (Fig. B)
Carefully unpack the appliance and check that it is complete. Dispose of the packaging
material correctly.
a. Screwdriver
b. Battery pack
c. Cutting attachment
d. Easy reach adapter
e. Angle gear attachment
f. Corkscrew attachment
g. Soil cultivator bit
h. USB charging cable
i. Manual
j. Screwdriver bit set
WARNING:
If any parts are damaged or missing, do not operate this tool until these
parts are replaced. Failure to heed this warning could result in serious personal
injury.
NOTE:
Always recycle the packaging in accordance with local recycling guidelines.
DESCRIPTION OF PRODUCT
1
2
3
4
5
6
7
a
c
d
e
f
h
i
j
g
b
OPERATION
Charging the battery pack
WARNING!
Do not use other charging wires which are not recommended by the
manufacturer.
NOTE:
The battery is supplied partially charged. To ensure full capacity of the battery, fully
charge the battery before using it on the product.
1. Connect the battery with the charging wire (Type C adaptor).
2. Connect the USB to the power source plug rated at 5V-1A
3. The green LED indicator will flash during normal charging.
4. The Indicator will show solid green light when battery pack has been fully charged.
Insert the battery
- Insert the battery in to the device; make sure the battery pack is in the right orientation.
IMPORTANT:
Make sure that the battery pack is inserted in the right orientation, torch light
button on up side.
- If you want to uninstall the battery pack, press the battery pack release lever and then
remove the battery pack.
5V 1A
