![background image](http://html1.mh-extra.com/html/yard-force/lw-cvc1/lw-cvc1_original-instructions-manual_3175376018.webp)
18
Mount the motor head (Fig. E)
1. Align the motor head 2 with the locking flaps 8 and insert it into the stainless steel
container 9.
2. Position the locking flaps 8 in the recesses on the motor head 2.
3. Close the flaps 8 by pressing down the lower parts.
Connect the suction hose / accessories (Fig. F)
Connect the suction hose
Insert the suction hose 16 with the suction hose connector into the hose connection 10 until it
audibly clicks into place.
Connect accessories
Insert the remaining end of the suction hose 16 into:
- The thick end of a suction tube 15 or 26
- into one of the nozzles 17, 18, 19, 23
Use as needed: no, one suction tube.
Dismantling (Fig. G)
Detach the motor head
1. Fold up the lower part of the right flap.
2. Loosen the closing flap 8 by unhooking and folding down the upper part.
3. Repeat points 1 and 2 for the left side.
4. Use the motor head handles 3 to lift the motor head 2 off the stainless steel container 9.
Remove the suction hose / accessories (Fig. H)
Remove the suction hose
Press the release button on the suction hose 16 and pull it off the hose connector 10.
Remove accessories
Hold the parts to be separated in one hand at a time.
Pull the pieces apart.
By twisting the parts, you can pull them apart more easily. Repeat points 1 and 2 for all parts
to be removed.
Remove / insert battery
Remove the battery (Fig. I)
1. Open the battery flap 7 on the motor head 2.
2. Press and hold the battery release button.
3. Pull the battery out of the battery holder 6
If the battery does not pull out easily, the release button was not pressed firmly enough. Press
the release button more firmly.
4. Close the battery flap 7 on the motor head 2.
OPERATION