background image

12

13

PRODUCT SAFETY WARNINGS

19. Always hold the trimmer firmly, with both hands on 

the handles while operating. Wrap your fingers and 

thumbs around the handles. 

20. Avoid Accidentally Starting–Don’t carry the trimmer 

with your finger on the trigger. 

21. Do not operate the trimmer in petrolic or explosive 

atmospheres. Motors in these appliances normally 

spark, and the sparks might ignite fumes. 

22. Damage to Trimmer – If you strike a foreign object 

with the trimmer or it becomes entangled, stop 

the tool immediately, remove the battery pack 

from the line trimmer, check for damage and have 

any damagerepaired before further operation is 

attempted. Do not operate with a broken guard or 

spool. 

23. If the equipment should start to vibrate abnormally, 

stop the motor , remove the battery pack from the 

line trimmer. and check immediately for the cause. 

Vibration is generally a warning of trouble. A loose 

head may vibrate, crack, break or come off the 

trimmer, which may result in serious or fatal injury. 

Make sure that the cutting attachment is properly 

fixed in position. If the head loosens after fixing it in 

position, replace it immediately. Never use a trimmer 

with a loose cutting attachment. 

24. Replace a cracked, damaged or worn-out cutting 

head immediately, even if damage is limited to 

superficial cracks. Such attachments may shatter at 

high speed and cause serious or fatal injury. 

25. Check the cutting attachment at regular short 

intervals during operation, or immediately if there is a 

noticeable change in cutting behavior. 

PRODUCT SAFETY WARNINGS

26. Only use Yard force authorized polymer trimmer line 

accessories and trimmer line that are designed for 

use with this machine. Although certain unauthorized 

attachments might be fitted to the Yard force line 

trimmer, their use may be extremely dangerous, and/

or damaging to the tools. 

27. To reduce the risk of serious injury, never use wire 

or metal-reinforced line or other material in place of 

the nylon cutting lines. Pieces of wire could break off 

and be thrown at high speed toward the operator or 

bystanders. 

28. To reduce the risk of injury from loss of control, never 

work on a ladder or on any other insecure support. 

Never hold the cutting attachment above waist 

height. 

29. If situations occur that are not covered in this manual, 

use care and good judgment. Contact the Yard force 

Service Center for assistance. 

30. Do not charge the battery pack in rain, or in wet 

locations. 

31. Use only with Yard force battery packs and chargers.

32. The battery pack must be removed from the 

appliance before it is scrapped.

33. The battery shall be disposed of safely.

34. Do not dispose of the battery in a fire. The cells may 

explode. Check with local authorities for possible 

special disposal instructions.

35. Do not open or mutilate the battery. Released 

electrolyte is corrosive and may cause damage to the 

eyes or skin. It may be toxic if swallowed.

36. Exercise care in handling batteries in order not to 

short the battery with conducting materials such as 

Summary of Contents for LT C25W
















Reviews: