28
29
TROUBLESHOOTING
WARNING:
Before performing any repair work, always ensure that the battery pack
has been removed.
WARNING:
Always wear heavy duty gloves when adjusting or cleaning, especially
when handling sharp objects.
Fault/malfunction Cause
Remedy
Mower fails to start
Safety key is not inserted
Insert safety key
Battery is not correctly inserted Remove the battery and reinsert
Mower standing in high grass
Start motor on shorter grass or
already mowed area, change cutting
height if necessary
The mower housing is clogged
Clean housing so that the blade can
move freely
Battery has no power
Check and recharge battery
Mower stops working
/loses power
Cutting height is incorrect
Adjust the cutting height
Cutting blade is worn or
damaged
Replace with new blade from dealer
service centre
Battery performance
decreasing
Check the battery performance and
charge it if necessary
Grass bag is not filled
sufficiently
Cutting height is too Low
Adjust and increase cutting height
The lawn / grass is wet
Allow the lawn to dry
Underside of the mower deck
is clogged.
Clean the underside of the mower
deck
Cutting blade is worn or dam-
aged.
Replace it by contacting the custom-
er service centre
Mower vibrating at
higher speed
Cutting blade is unbalanced
Balance the blade by grinding each
cutting edge until equal
Blade is Loosened /incorrectly
fitted
Tighten the blade bolt
Mower cuts unevenly The blade is damaged
Blade is assembled incorrectly
Sharpen the blade or replace
Re-assemble blade correctly
CE DECLARATION
To the provisions of Council Directives
We
MEROTEC GmbH
Otto-Brenner-Str. 8
47877 Willich, Germany
Declare that the product:
Machine Description: 40V CORDLESS LAWNMOWER
LM G40B
Y0j-SP02-4040ZE
Function: Cutting grass
Complies with the essential health and safety requirements of the following directives:
Machinery Directive 2006/42/EC
Electromagnetic Compatibility Directive 2014/30/EU
EC Directive 2011/65/EU and its amendment Directive (EU) 2015/863 (RoHS)
Noise Emission in the Environment by Equipment for Use Outdoors Directive
2000/14/EC amended by 2005/88/EC
We additionally confirm the following in accordance with the 2000/14/EC amended by
2005/88/EC emissions guideline,
Conformity Assessment Procedure as Per Annex VI,
TÜV Rheinland LGA Products GmbH - Tillystraße 2 -90431 Nürnberg
Notified under No. 0197
Measured Sound Power Level:
LM G40B
81
.
1 dB(A) K=3 dB(A)
Declared Guaranteed Sound Power Level: 96 dB (A)
Standards and technical specification referred to :
EN 60335-1:2012+A11+A13+A1+A14+A2
EN 60335-2-77:2010
EN 55014-2:2015
EN 55014-1:2017
EN 62233:2008
EN 50581:2012
Authorized Signatory
Date:
24.09.2020
Signature:________________________
Place:
Willich
Name:
Roland Menken
General Manager
MEROTEC GmbH
Otto-Brenner-Str. 8, 47877 Willich, Germany
