background image

4

5

INTENDED USE

This cordless hedge trimmer is designed for cutting and trimming of hedges, 
bushes and ornamental shrub in the domestic environment.
For safety reasons it is essential to read the entire instruction manual before first 
operation and to observe all the instructions.

This product is intended for private domestic use only, not for any commercial 
trade use. It must not be used for any purposes other than those described.

GENERAL SAFETY WARNINGS

WARNING!

Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may

result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future 

reference.

The term “power tool” in the warnings refers to your 

mains-operated (corded) power tool or battery-operated 

(cordless) power tool.

Work area safety

1.  Keep work area clean and well lit. Cluttered or dark 

areas invite accidents.

2.  Do not operate power tools in explosive atmospheres, 

such as in the presence of flammable liquids, gases 
or dust. Power tools create sparks which may ignite 
the dust or fumes.

3.  Keep children and bystanders away while operating 

a power tool. Distractions can cause you to lose 
control.

Electrical safety

1.  Power tool plugs must match the outlet. Never modify 

the plug in any way. Do not use any adapter plugs 
with earthed (grounded) power tools. Unmodified 
plugs and matching outlets will reduce risk of electric 
shock.

2.  Avoid body contact with earthed or grounded 

surfaces, such as pipes, radiators, ranges and 
refrigerators. There is an increased risk of electric 
shock if your body is earthed or grounded.

3.  Do not expose power tools to rain or wet conditions. 

Water entering a power tool will increase the risk of 
electric shock.

4.  Do not abuse the cord. Never use the cord for 

carrying, pulling or unplugging the power tool. Keep 
cord away from heat, oil, sharp edges or moving 
parts. Damaged or entangled cords increase the risk 
of electric shock.

5.  When operating a power tool outdoors, use an 

extension cord suitable for outdoor use. Use of a cord 
suitable for outdoor use reduces the risk of electric 
shock.

6.  If operating a power tool in a damp location is 

unavoidable, use a residual current device (RCD) 
protected supply. Use of an RCD reduces the risk of 
electric shock.

NOTE: 

The term “residual current device(RCD)” may

be replaced by the term “ground fault circuit interrupter

(GFCI)” or “earth leakage circuit breaker(ELCB)”

GENERAL SAFETY WARNINGS

Summary of Contents for LH C45
















Reviews: