background image

20

Using the Self-propelled function

1.  This lawnmower equipped with self-propelled system.
2.  Push the self-propelled rear switch bar towards the handle and hold it in position. The 

lawnmower will start to move automatically.

 (Fig. O)

3.  To stop the moving lawnmower, simply release the drive.

Mowing with collection bag

WARNING! 

Always observe the strictest safety procedures when using the lawnmower.

Start the engine and allow it to run.
Keep a firm grip on the upper handle and stop/start bar and walk along with it. Never run with 
the mower. Be very careful when mowing uneven or rough ground. Maintain a stable footing.
Mow across slopes, never up and down. Be careful when changing the direction of the mower 
on a slope. Do not use the mower on a steep slope of more than 15°.

NOTE:

The best results are achieved when the grass is dry. Wet grass will clog the blade and the 
grass collection system. 
Grass grows at different rates at different times of the year. Never use the lowest cutting 
height for the first cut of the season or in drought conditions. Only about one third of the 
grass height should be cut.
If the lawnmower will not collect the cuttings efficiently, the grass discharge chute may be 
blocked, the grass bag may be full or the underside of the mower deck may be clogged.

Function of full indicator (Fig. P)

If the grass bag is empty or it is not filled with grass, the grass full indicator will be open. 
If the grass bag is filled with grass the grass full indicator will be closed.

Emptying the grass bag

Raise the discharge flap with one hand and remove the grass bag using its handle with your 
other hand. To maintain safety, the discharge flap will close back to cover the mulching plug 
when released.
Empty the grass clippings from the collection bag and refit. If grass is caught in the discharge 
chute, clean it using a nylon-bristled brush.

Mowing with mulching

When mulching, remove the grass collection bag and insert the plastic mulching plug into the 
rear discharge chute. Release the flap to cover the plug. 

NOTE: 

To ensure that the cut grass can be mulched efficiently, do not cut high or wet grass

OPERATION

Summary of Contents for GM B46CK



























Reviews: