background image

20

WARRANTY

This product is covered by a 1 year parts and labour warrant against manufacturing defects. 

Our goods come with guarantees that cannot be excluded under the Australian Consumer 
Law. 

You are entitled to a replacement or refund for a major failure and for compensation for 
any other reasonably foreseeable loss or damage. You are also entitled to have the goods 
repaired or replaced if the goods fail to be of acceptable quality and the failure does not 
amount to a major failure. 

This warranty will not apply: 
(i) where this product has been subjected to misuse, abuse, accident or want of care;
(ii) where this product has been used for a purpose for which it was not designed or is not
suited;
(iii) where the service of this product has been undertaken by a non-authorised person or
company or if non-approved parts have been used;
(iv) where this product has been used for trade, industrial or commercial purposes.

Should service become necessary during the warranty period, the purchaser should contact 
Action Spares on 1300 418 640. 

In order to obtain warranty service, the purchaser must present the store receipt showing the 
name of the retailer and the date of purchase. 

The period of the warranty begins from the original date of purchase, notwithstanding any 
subsequent repair or parts replacement. 

Purchaser shall be responsible for all transport charges to and from the Authorised Service 
Centre. 

Damage in transit is not covered by this warranty. The purchaser should remove from the 
product any liquids (if applicable) before sending the product for service or repair. 

The product should be packed securely to prevent damage. 

WARRANTY EXCLUSIONS 
Wear parts or service related parts required when performing normal and regular maintenance 
of this product are not covered by warranty unless it is found to be defective by an Autho-
rised Service Centre. 
These include, but are not limited to: Filters, “O” rings, washers.

Summary of Contents for ER U45





















Reviews: