16
17
Setting cutting height (Fig. H)
1. Adjust the cutting height according to the needs of your lawn.
2. When mowing high grass, start with the maximum cutting height and make a second cut
with a lower cutting height.
Switching on/off (Fig. I)
1. Ensure the start lever is released.
2. Press the lock-off button and hold it in position.
3. Squeeze the start lever towards the handle to switch the product on. Hold the start lever
in position during operation.
4. Release the lock-off button once the product is running.
5. Release the start lever to switch the product off.
NOTE!
The product can only be started by pressing the lock-off button first followed by
squeezing the start lever .
Reverse operation will not start the product.
NOTE!
The cutting device will continue to rotate for a short period after the product has been
switched off.
Grass catcher
Always attach the grass catcher when using the product for grass collection.
Always carry the grass catcher by its handle.
Empty the grass catcher frequently during use. Do not wait until it is completely full. We
recommend emptying it when it is half full.
NOTE!
A full grass catcher will reduce the performance of this product.
1. Lift the deflector guard and lift the grass catcher off the hooks.
2. Remove the grass clippings from the discharge chute into the grass catcher. Use a
proper tool such as a brush.
3. Remove the grass catcher.
4. Empty the grass clippings onto a compost heap.
5. Re-fit the grass catcher to the hooks.
OPERATION
OPERATION
Mowing
1. Never cut off more than one-third of the total length of the grass for a healthy lawn. In
the autumn, lawns should only be cut as long as there is growth.
2. Slowly push the product forward.
3. Mow in slightly overlapping rows. The most effective pattern for mowing lawns is straight
lines along one of the sides. This will keep the rows even and ensures that all the lawn is
cut without missing any spots.
4. Circle around flower beds. When reaching a flower bed in the middle of the lawn, cut a
width or two around the circumference of the bed.
5. Pay special attention when changing direction.
WARNING!
If the product strikes a foreign object stop the motor immediately. Switch the product off,
disconnect it from the power supply and let it cool down. Inspect the product thoroughly for
damage. Have any damage repaired by a suitably qualified person before restarting.
Note the following when mowing and mulching
The following instructions help you use the device effectively and safely. Improper handling of
the device can cause damage to it.
Extensive vibration of the product during operation is an indication of damage. Stop the
motor unplug and check for damage.
