Yard force ASYBL01200 Original Instructions Manual Download Page 10

16

17

PRODUCT SAFETY WARNINGS

27. Always wear safety glasses with side shields. 

Everyday glasses have only impact resistant lenses. 
They are NOT safety glasses. Following this rule will 
reduce the risk of eye injury.

28. Protect your lungs. Wear a face or dust mask if the 

operation is dusty. Following this rule will reduce the 
risk of serious personal injury.

29. Protect your hearing. Wear hearing protection during 

extended periods of operation. Following this rule will 
reduce the risk of serious personal injury.

30. Battery powered blowers do not have to be plugged 

into an electrical outlet; therefore, they are always in 
operating condition. Be aware of possible hazards 
when not using your battery powered blower or when 
changing accessories. Following this rule will reduce 
the risk of electric shock, fire, or serious personal 
injury.

31. Wear heavy long trousers, long sleeves, boots, and 

gloves. Avoid loose garments or jewelry that could 
get caught in moving parts of the machine or its 
motor.

32. Do not operate the equipment while barefoot or when 

wearing sandals or similar lightweight footwear. Wear 
protective footwear that will protect your feet and 
improve your footing on slippery surfaces.

33. Batteries can explode in the presence of a source 

of ignition, such as a pilot light. To reduce the risk 
of serious personal injury, never use any cordless 
product in the presence of an open flame. An 

PRODUCT SAFETY WARNINGS

exploded battery can propel debris and chemicals. If 
exposed, flush with water immediately.

34. Keep firm footing and balance. Do not overreach. 

Overreaching can result in loss of balance.

35. Check the work area before each use. Remove all 

objects such as rocks, broken glass, nails, wire, or 
string which can be thrown by or become entangled 
in the machine.

36. Do not point the blower tube in the direction of 

people or pets.

37. Never run the unit without the proper equipment 

attached. Always ensure that the blower tube is 
installed.

38. When not in use, the blower should be stored indoors 

in a dry, secure place out of the reach of children.

39. Keep all bystanders, children, and pets at least 15m 

away.

40. Blower service must be performed only by qualified 

repair personnel. Service or maintenance performed 
by unqualified personnel may result in a risk of injury.

41. When servicing a blower, use only identical 

replacement parts. Follow instructions in the 
Maintenance section of this manual. Use of 
unauthorized parts or failure to follow Maintenance 
Instructions may create a risk of shock or injury.

42. Never use the blower near fires or hot ashes. Use 

near fires or ashes can spread fires and result in 
serious injury and/or property damage.

Summary of Contents for ASYBL01200















Reviews: