Press RIGHT button, it is normal mode. When the probe tip is in the
status of power output, the red light on.When the tip is in the status of
ground, green light on. Otherwise, the lights off .Contact the probe tip
to a circuit, LCD will display the voltage of the tip and auxiliary
ground lead. (Figure 14)
PULSE
12. 0
v
Figure 14
SETTING Mode:
Setting current protection from 2-18A.The device will disconnect
from the relay and exit from function menu once current is
overlarge.(Figure 15)
SETTING
16
A
Figure 15
Voltage Supply:
While in this mode, you can set voltage output(0-5V, variable voltage
value 0.5V). (Figure 16)
VOLTS
SUPPLY
VOLTS
VREF
2.5V
2.5V
Figure 15
11
