Yanmar SK1550, Operator'S Manual

Page: 28 / 99

SK1550 Operator’s Manual
Prepare - 27
Prepare Equipment
Assemble Accessories
If required, mount fire extinguisher near the power unit but away from possible points of ignition. The fire
extinguisher should always be classified for both oil and electric fires. It should meet legal and regulatory
requirements.
Connect Attachment
1. Position attachment on level surface with
enough space behind it to accommodate
machine.
2. Start engine.
3. Tilt attachment plate (2) forward.
4. Position attachment plate in upper lip of
receiver plate (1) on attachment.
5. Raise lift arms while tilting back attachment
plate to engage pins.
NOTICE: Use only Ditch Witch®-approved attachments. Attachments can change the stability and
operating characteristics of the machine. See attachment operation manual for instructions regarding
proper operation of attachments.
IMPORTANT:
Before connecting attachment to machine, ensure that attachment and receiver plates
are free of dirt and debris.
t62om006w19.eps
1 2