Yanmar SD60, Operation Manual

Page: 8 / 44

SAFETY
4
SD60 Operation Manual
SAFETY PRECAUTIONS
General Information
There is no substitute for common sense
and careful practices. Improper practices
or carelessness can cause burns, cuts,
mutilation, asphyxiation, other bodily injury
or death. This information contains general
safety precautions and guidelines that
must be followed to reduce risk to personal
safety. Special safety precautions are
listed in specific procedures. Read and
understand all of the safety precautions
before operation or performing repairs or
maintenance.
Before You Operate
DANGER
• Never permit anyone to
install or operate the
Sail-Drive without
proper training.
• Read and understand this Operation
Manual before you operate or service
the Sail-Drive to ensure that you
follow safe operating practices and
maintenance procedures.
• Safety signs and labels are additional
reminders for safe operating and
maintenance techniques.
• See your authorized Yanmar marine
dealer or distributor for additional
training.
Crush Hazard
• Never stand under a
hoisted Sail-Drive.
• If the hoist mechanism fails, the
Sail-Drive will fall on you. When you
need to transport a Sail-Drive for
repair, have a helper assist you to
attach it to a hoist and load it onto a
truck.
• Never support marine gear with
equipment not designed to support
the weight of the marine gear such as
wood blocks or by only using a jack.
• Never use the Sail-Drive lifting eye to
lift the engine and Sail-Drive as an
assembly. Use the engine lifting eyes
to lift the engine and Sail-Drive. Only
use the Sail-Drive lifting eye to lift the
Sail-Drive as a separate component.
SD60_OPM.book 4 ページ ２０１７年１２月８日 金曜日 午後３時６分