1. Loading generator, Tools to Be Used
1-4
1-2-3. Tools to Be Used
Proper supporting and lifting
z
Never operate when the product is supported with blocks or wooden pieces
or only with a jack. Always use a crane with sufficient allowance in limit load
or with rigid jack(s) for lifting and supporting the product.
[Non-observance]
Severe accidents may arise.
Use of appropriate tools
z
Use appropriate tools for individual jobs. Use a correct-size tool when loos-
ening or tightening a nut or bolt.
[Non-observance]
A severe injury or damage to a machine or part may arise.
1-2-4. Parts
Always use genuine items
[Non-observance]
Shortening of the machine life or unexpected accidents may arise.
1-2-5. Bolt Tightening Torque
Always tighten to torque specified in the manual, if any
[Non-observance]
Loosening or falling will arise to damage the machine or parts or cause inju-
ries.
1-2-6. Product Handling
Pay attention to hot parts
z
The lamps, balloon and the lighting units are hot while lamps are on and right
after they are turned off. Take great care in handling them.
[Non-observance]
Scald may occur.
Keep clear of pinch-point
z
Keep clear of pinch-point of the mast and the lamp stand when handling
them.
[Non-observance]
An injury may be caused by unexpected entrapping.
[NOTICE]
