CL600 Operator's Manual
■
Fill the Bucket
Before approaching and entering a pile, level the
bucket.
Once the bucket is in the pile, slowly move the
implement control lever diagonally rearward and
towards the operator.
●
The preceding action simultaneously raises (b) the
boom while making the bucket curl (a).
(A) Implement control lever
(a) Curl
(b) Raise
The simultaneous action of lifting the boom and
curling the bucket increases efficiency because
maintaining a level bucket throughout the lifting cycle
prevents the bucket from lifting and from easily
breaking away.
■
Lift the Load
Always keep the upward orientation (see the figure
below) of the bucket during load lifting to prevent
load spillage.
P1100362_2.eps
(a)
(A)
(b)
P5-3 top view_1
INCORRECT
CORRECT
2022022.eps
NOTE
●
Do not be concerned if the bucket is not
completely filled during each pass.
●
Maximum productivity is determined by the total
sum of the material loaded and moved in a given
period of time.
●
More time is lost if two or more attempts are
made to fully fill the bucket at every pass.
To prevent serious personal injury or death:
●
Do not attempt to lift bucket loads in excess
of the loader capacity.
●
Always move the tractor to level ground
before attempting to raise the bucket to the
highest position.
IMPORTANT
●
In case the tractor requires increased stability for
a particular operation, contact YOUR LOCAL
YANMAR TRACTOR DEALER about additional
weights for the rear of the tractor.
2022023.eps
! WARNING
Summary of Contents for CL Series
Page 46: ...NOTE...
