Yanmar 6LY3 series, Technical Manual

Page: 17 / 87

Electronic Control System: Technical Manual for 6LY3 Series Engines
WARNING
This setting should be used with caution since all
calibration data and user settings will be lost.
The DEFAULT MONITOR function resets all
settings for the display unit back to a default values.
Press
OK!
to reset your i5601E or press
BACK
to
cancel.
The
ABOUT
screen displays useful information about your i5501E, such as
part number and software version. This information may be needed by Yanmar
Customer Support in the event you contact them.
Beeper
Default Monitor
Display choice Function
“ON” Turns on Audible Beeper
“OFF” Turns off Audible Beeper
About
Upon entry into the User Setttings Menu the software will get data from the network i83xx and CH67
Control Head Units. If necessary the software will try up to 3 times to connect and retrieve data from the
units.
The following status will be displayed:
RETRY:
will try to retieve the settings again. This will give the user a chance to
try to fi x a problem and then retry again.
OK:
to continue without retieving the failed settings. If this is done some menu
items will be missing and others will display "…" for not available data.
BACK:
to returns back to the Main Menu
USER Settings
i83xx: “Processing”
“Transfer OK”
“Transfer Failed”, “Is ignition on?”
CH67 “Processing”
“Transfer OK”
“Transfer Failed”, “Connection Problem?”