ENGINE
TNV DI Service Manual
6-37
2-Valve Cylinder Head
Removing the glow plugs
1. Remove the glow plug harness
(Figure 6-6, (2)) from each glow plug
(Figure 6-6, (1)).
2. Remove the glow plug from the cylinder head.
Figure 6-6
Note: Removing the cylinder head from the
engine requires that the glow plugs be
removed in advance.
Failure to remove the glow plugs in
advance could result in damages to the
glow plugs because their tips are
protruding from the cylinder head
combustion chamber surface.
Removal of Valve Cover
1. Remove the valve cover nuts (Figure 6-7, (1)).
2. Remove the O-ring (Figure 6-7, (2)) on each
valve cover nut.
Figure 6-7
3. Remove the valve cover (Figure 6-7, (3)) and
the valve cover gasket (Figure 6-7, (4)).
(2)
(1)
0001920
(4)
(3)
(1)
(2)
TNV_DI_SM_A4.book 37 ページ ２００７年１２月６日 木曜日 午前９時２３分