7
3.0 Do's and don 'ts for first use
Please follow the following procedures for the first use of the new machine (under the
guidance of the sales engineer assigned by the company or the agent) :
1. Open the package carefully to prevent damage to the machine during opening.
Remove the machine from the packing case carefully.
Check whether the random accessories are complete;
2. After carefully reading the Operation Manual or explaining the operation essentials
and precautions by the sales engineer,
Operate the machine on a fully understood basis (assign a person to operate it);
3. Connect the suction gripper with the suction gripper. After adjusting the position,
tighten the two fixed handles, straw mouth and the machine
Is connected to the joint of;
4. Take out the brush plate and select the appropriate brush plate or cleaning pad
according to your ground condition to prepare for the installation;
5. Pour clean water into the clean water tank;
6. Putthebrushplateon,putdownthewater-absorbingsteakandbrushplate;
7. Start suction motor, brush motor and solenoid valve;
8. Openthehandleofthewatervalveswitchtoadjusttheappropriatewateroutput;
9. Turn on the forward switch for cleaning;
10. After cleaning,close thebrush platemotor first,and thenclose the waterabsorption
motor;
11. Raise the brush plate and water absorption rack to discharge the sewage;If you have
finished the day's work, please carry out the machine as required
Cleaning and maintenance;
12. Drive the machine to the parking place.
4.0 Daily operation and maintenance
Homework preparation:
1) Select the appropriate detergent and detergent concentration according to the
polluted state of the ground;
Most of us only need two cups of cleaning fluid from a one-time water cup
(Disposable cups are commonly used) as shown in the picture on the right;
In order toprotect the environment, pleasetry to reducethe amount ofdetergent!Use
a neutral, low-foam cleaner!When using cleaner, use defoaming agent at the same time,
in order to eliminate the foam of sewage tank, extend the service life of water absorption
motor!
Add water sponge
