YZ-GS1
Operating
Manual
Operating Manual
YZ-GS1
4, charging
The charging plug is located on
the right side of the machine
after work finished, simply plug
the charger jack into the
sweeper as shown
Part IV
Daily maintenance
1
5 4 3 2
1. main Brush
2. main brush edge baffle retaining nut
3. Main Brush Side Fender 4. main brush connection board
5. main brush connection plate retaining nut needs to replace or clean the main brush,
open the left door and unscrew the main brush connection plate plywood fixation
2, side brush replacement
When the edge brush needs to be
replaced, drop the edge brush lift rod
first, and unscrew the three rubber
nuts fixing the edge brush to remove
the edge brush. After replacing the
brush, unscrew the three rubber nuts
to secure the side brush.
Part V. Notes
① Non-professional personnel strictly operate the
sweeper
② No cleaning of silk, ribbon items
③ Deep discharge is strictly prohibited
④ No parking parking on slope
⑤ leave after power-off
⑥ prohibited in rainy days
⑦ strictly prohibited. For voltage below 31.5V,
please charge in time
7
8
