Jinma 200 series Tractor Users Manual
MCE 2004.01
position to operate the headlights and taillights.
•
Starting Switch:
Turn to first notch clockwise, and power is supplied to the lights and charging system.
This is the "on" position. Turn switch further clockwise,( you will feel spring tension,) to next notch, (you
will notice amp gage show discharge,) and hold for about 20 seconds to operate glow plugs in very cold
weather. Turn switch full clockwise, and starter will engage to start engine. Release key when engine
starts. Use glow plugs only when temperature is freezing or below. Tractor may also be started by turning
key counterclockwise. This will start the tractor, but will not allow alternator system or lights to operate.
This position should not be used in normal operation. NOTE: Clutch pedal must be pushed down all the
way for starter to operate.
Instruments (Optional)
The optional Instrument Panel has the same lower switches (turn signals, work light, horn, headlights, and start
switch) along with an enhanced gauge package.
•
Amp meter
: Indicates the current intensity of battery
while being charged or discharged. If the pointer
deflectsto "+"side, it means that the battery is being
charged. If the pointer deflects to the "" side, it is being
discharged.
•
Water Temperature Gauge:
Indicates the water
temperature of the engine cooling system.
•
Tachometer/Hour Meter:
Display Engine RPM and
the accumulated running time of the engine.
•
Oil Pressure Gauge:
Indicates the oil pressure of the
engine. Normal oil pressure is 24 kgf/cm2 (0.2
0.4Mpa).
•
Fuel Gauge:
Indicates the remaining fuel in tank.
Version 0.2
Page 18 of 52
Figure 13. New style electronic instrument cluster
Figure 14. New style lower dash switches
