9
Operation Method
Preparation for Operation
3. Setting of sample
Install the unit at a stable place. Put sample in the container which is suitable to the shaking table, then
set it on the shaking table. At this time, confirm that the container is surely set on the shaking table. If
sample is put up to the upper part of the container, sample may be overflowed during shaking.
4. Connection of power
Confirm that the Power switch is OFF and the Speed knob is at the position of MIN, then connect the
power cord to the power of AC 100V. At this time, always ground the unit.
Unit Operation
①
Turn On the Power switch and turn the Speed knob clockwise to start the shaking.
Turn the Speed knob clockwise to raise the shaking speed. It becomes the continuous operation when
the Power switch is ON. When it is ON, the shaking speed is displayed in digital, so it can be used at
time of setting of the shaking speed.
②
When the power switch is set to TIMER, it start timer operation.
When the unit is operating, the speed
indicator show the concussion speed.
※
About the setting method of the timer, refer to next page
“Timer operation method”
.
③
When the shaking is completed, turn the Speed knob counterclockwise to MIN, then turn OFF the Power
switch.
Timer Operation
Time unit and time range must be set.
Factory default setting is E mode and 30min.
The operation mode have two ways.
E mode: Utilizes timer or clock to automatically stop an operation.
A mode: Utilizes timer or clock to automatically begin an operation. Operation must be stopped
manually.
1. Component Name
Power indicator (green)
(Flashes when Timer operates;
lit when Timer stops operating)
Operating mode display window
Operating mode selector
Select mode form A and E.
Scale range display windows
Time unit display window
Time setting knob
(set time)
Time unit selector
(select one from sec, min, hrs and 10h)
Time range selector
(select one from1, 2, 3, 12 and 30)
Output indicator (orange)
(Lit when output)
Summary of Contents for MK201D
Page 2: ......
