background image

39 

9. After sales service and warranty

 

When requesting a repair

 

 

When requesting a repair

 

 

If any trouble occurs, immediately stop operation, turn the power switch off, pull out the power 
plug and contact your dealer or our sales office.

 

 

Information necessary for requesting a repair

 

Model name of the product

 

Serial number 

Date (y/m/d) of purchase

 

Description of trouble 

as in detail as possible

 

 

Be sure to indicate the warranty card to our service representative.

 

 
 

Warranty card (attached separately)

 

Warranty card is given by your dealer or one of our sales offices and please fill in your dealer, 
date of purchase and other information and store securely.

 

 

Warranty period is one full year from the date of purchase.    Repair service for free is available 
according to the conditions written on the warranty card.

 

 

For repairs after the warranty period consult your dealer or one of our sales offices.  Paid 
repair service is available on your request when the product’s functionality can be maintained 
by repair.

 

 
 

Minimum holding period of repair parts

 

The minimum holding period of repair parts for this product is seven years after end of 
production.

 

Repair parts here refer to parts necessary for maintaining performance of the product.

 

 

Refer to the warranty card or the nameplate on the unit.

 

See 

3. Names and functions of parts

 on page 10. 

Summary of Contents for DVS402
















































Reviews: