5 3
TO MODULATE FAN BLADE(OPTION)
※
In the following case setup figure of fan speed by each operation mode is displayed and
is impossible to change it.
ⅰ〕
When operation ends by auto stop operation mode and function parameter is off
ⅱ〕
While program operation mode is in operation or it stops after operation.
ⅲ〕
In case of remote operation mode.
1. T o h a v e “F a n ” d i s p l a y
・
On item choice screen in function, have “Fan” display and press jogdial.
Fan 1
℃
FIXED TEMP
AUTO START
AUTO STOP
PROGRAM
2. T o d e c i d e f a n s p i n n i n g s p e e d
・
Cursor disappears and current setup speed blinks. Turn jogdial to decide the speed
from 1
〜
10 and have it display.
Fan
１
↓
Fan
１０
3. P r e s s “J o g d i a l ”
Fan 1
℃
FIXED TEMP
AUTO START
AUTO STOP
PROGRAM
・
Fan spinning speed is fixed and it returns to item choice screen in function menu.
＊
If the speed is set from 1 to 6, it makes sound. This is because of wind control and there is no
problem in performance.
