18
Operating Procedure
Operating Procedure
When prepared completely, proceed as follows:
1. Turning of power supply
2. Selection of operation menu
z
Turn on the earth leakage breaker.
z
Press the MENU key several times to select
desired operating method.
z
The present time is shown on the sub
display.
Press MENU key several times
z
It allows you to enter each parameter into a
flashing menu.
↓
Push the POWER key in the operation panel.
z
When once the power is on, this oven
becomes a standby state. Under such a
condition, every operation mode can be
selected by pushing the MENU key.
○
Fixed Temperature
↓
○
Auto start
↓
○
Auto stop
↓
○
Program
Explanation of operation menu
1. Fixed Temperature
2. Auto start
3. Auto stop
4. Program
: It is an operation method to bring the oven to the desired temperature
and keep it steady.
: It is an operation method to start the temperature operation when
reached the set time or hours.
: It is an operation method to stop a fixed temperature operation when
reached the set time or hours.
: It is an operation method that can start or stop an operation either
when reached the set time or hours. Moreover, it can change the
temperature when reached the desired time and repeat to do that.
※
Refer o the attached instruction manual “Programmable controller
high-tech
Ⅳ
type” to know the way to input the program or edit.
