Yamato AW-WPS, User Manual, Page: 9 / 11

16
ERROR MESSAGES
Message Description
Low battery indicator for wireless display:
This warning indicates the batteries for the
wireless display are low. Please replace all
the batteries or use the AC adapter for
operation.
Low battery indicator for scale base:
This warning indicates the batteries for the
scale base are low. Please replace all
batteries or use the AC adapter for operation.
EEPROM error for wireless display:
The programming for the wireless display has
an error.Please contact customer service.
EEPROM error for scale base:
The programming for the scale base has an
error.Please contact customer service.
Overload or counting error (too high):
The weight or count capacity is over the limit.
Please reduce the weight/count and try again.
Overload or counting error (too low):
The weight or count capacity is under the limit.
Please increase the weight/count capacity and
try again.
17
FEDERAL COMMUNICATIONS COMMISSION (FCC)
STATEMENT
Transmission Collision
Signals from other household devices, such as doorbells, home
security systems and entry controls, may interfere. This is normal
and does not affect the general performance of this product. The
transmission will resume once the interference recedes.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
Modifications not authorized by the manufacturer may void users
authority to operate this device.
FCC ID: YKFRF2500