cod. 54503 - mod. PT 2000 N
WARNING! Risk of injury!
Use the stand (F) for resting the device. Don’t put the
device down on any inflammable surface.
- Attach the required cap nozzle.
- On/off
- Adjust the temperature by turning the switch on I or II
- As soon as the work is completed pull out the mains plug and put the product on its stand
(F) to let it cool down.
Cleaning and maintenance
WARNING!
Risk of injury!
Switch off the product and disconnect the mains plug
before all cleaning and maintenance work. Wait until all moving parts have come to
a complete stop and the product has cooled down.
Cleaning the product
Careful handling and regular cleaning ensure that the product remains functional and
efficient for a long time.
- Wipe down the product with a slightly damp cloth.
- Never spray the product with water or expose it to water.
- Never use detergents or solvents for cleaning. This can cause irreparable damage to
the product. The plastic parts can be eaten away by the chemicals.
- Keep the air inlet openings and nozzle clear of impurities and blockages.
Information on disposal for users of waste electrical & electronic equipment.
This symbol on the products and/or accompanying documents means that used
electrical and electronic products should not be mixed with general household
waste. For proper treatment, recovery and recycling, please take these products
to designated collection points, where they will be accepted on a free of charge basis.
Disposing of these products correctly will help to save valuable resources and prevent
any potential negative effects on human health and the environment which could
otherwise arise from inappropriate waste handling. Please contact your local authority for
further details of your nearest designated collection point.