1
INTRODUCTION
Thank you very much for purchasing of 「MANOSTAR TRANSMITTER EMT1」.
△
！
Caution
To ensure your safety in using this instrument:
・
Be sure to read the instruction manual carefully before using this instrument so that you can
use it properly.
Wrong use may result in failure of this instrument and lead to its damage and accident. This
manual should be kept in a proper place so that you can refer to it any time you need.
△
！
Warning
・Do not apply the pressure to the instrument more than it can withstand.
The diaphragm and the retainer are broken and cause of injury or accident, etc. disaster if the pressure
exceeding withstanding pressure of the pressure receiving element is applied to the instrument. The case
body and the transparent cover of the instrument are broken and cause of injury or accident, etc. disaster
if the pressure exceeding withstanding pressure of the instrument body is applied to the instrument.
・Avoid using where instrument is exposed to many vibration and impact.
Using this instrument where intensified vibration and impact may be damaged instrument. It is expected
that gas leaks of instrument which harms a parson.
・Do not exceed rated surrounding temperature, humidity and altitude in use.
Using this instrument by exceeding rated surrounding temperature and humidity and altitude it may be
damaged and cause the accident.
・Do not disassemble or reconstruct your instrument.
It may void your warranty.
△
！
Caution
・As to where to install and how to install the instrument, be sure to follow the instruction manual
provided so as to ensure a proper method.
・In case of not being installed in dry and well-kept clean locations, the instrument must be enclosed in
box.
・Do not use organic solvent for cleaning.
Use of organic solvent, such as thinner and benzene, to remove surface dirt and stain may cause
melting and cracking on the surface. To remove dirt and stain, be sure to wipe them off with a wet cloth
using diluted neutral cleanser.
・Wrong terminal connection
If the signal input and output terminals are connected to the power supply, the internal mechanism burns
out.
・Dropping the product.
Product is a precision instrument. If you drop the product, there is a possibility that the exterior, also the
interior mechanism damage.
・Removal of the piping
If you replace the old pipes, please do not pull the pipe with a strong force. There is a possibility that the
pipe cap is broken.
