manualshive.com logo in svg

Yamakoyo SH2900DX, Owner'S Manual

Share
Download
Yamakoyo SH2900DX Owner'S Manual Download Page 20

17

MAINTENANCE

3.  Soak the element in clean engine oil and squeeze out the excess oil. The engine    

     will smoke during initial start-up it too much oil is left in the element.

4.  Reinstall the air cleaner element and the cover.

AIR CLEANER COVER 

CLIP

CLIP

AIR CLEANER ELEMENT 

ELEMENT

Fuel Sediment Cup Cleaning

The sediment cup prevents dirt or water which may be in the fuel tank from entering 

the carburetor. If the engine has not been run for a long time, the sedim cup should 

be cleaned.

1.  Turn the fuel valve to the OFF position. Remove the sediment cup, O-ring, and filter.

2.  Clean the sediment cup, O-ring, and filter in nonflammable or high flash point solvent.

3.  Reinstall the filter, O-ring, and sediment cup.

4.  Turn the fuel valve ON and check for leaks.

FUEL VALVE

SEDIMENT CUP

OFF

SEDIMENT CUP

O-RING

Spark Plug Service

Recommended spark plugs:

  YK550, YK650,  YK800, YK900, YK1100, YK1300,    

Yk1500, BP6ES(YAMAKOYO)

To ensure proper engine operation, the spark plug must be properly gapped and free 

of deposits.

FUEL FILTER

Summary of Contents for SH2900DX




























Reviews:

No comments

Brands by name

Popular brands

Load more brands