Yamaha YZFR6X(C), Owner'S Manual

Page: 61 / 120

PERIODIC MAINTENANCE AND MINOR REPAIR
6-11
6
To install the cowling
1. Connect the turn signal light lead
coupler.
2. Fit the projections into the slots,
slide the cowling rearward, and
then fit the forward-most projection
into the slot.
3. Fit the projection on cowling A into
the hole in cowling B as shown.
4. Install the bolts, quick fasteners,
and quick fastener screw.
EAU39092
Cowling C
To remove the cowling
1. Remove cowling B and panel B.
(See page 6-9.)
2. Unfasten the wire harness by
pressing on the projection to open
the plastic fastener.
1. Cowling A
2. Turn signal light lead coupler
1. Cowling B
2. Turn signal light lead coupler
1. Cowling A
2. Turn signal light lead coupler
1. Cowling B
2. Turn signal light lead coupler
1. Cowling A
2. Cowling B
U13S10E0.book Page 11 Friday, September 7, 2007 5:10 PM