INSTRUMENT AND CONTROL FUNCTIONS
3-9
3
Display brightness and shift timing
indicator light control mode
This mode cycles through five control
functions, allowing you to make the fol-
lowing settings in the order listed be-
low.
●
Display brightness:
This function allows you to adjust
the brightness of the displays and
tachometer to suit the outside
lighting conditions.
●
Shift timing indicator light activity:
This function allows you to choose
whether or not the indicator light
should be activated and whether it
should flash or stay on when acti-
vated.
●
Shift timing indicator light activa-
tion:
This function allows you to select
the engine speed at which the indi-
cator light will be activated.
●
Shift timing indicator light deactiva-
tion:
This function allows you to select
the engine speed at which the indi-
cator light will be deactivated.
●
Shift timing indicator light bright-
ness:
This function allows you to adjust
the brightness of the indicator light
to suit your preference.
NOTE:
In this mode, the right display shows
the current setting for each function
(except the shift timing indicator light
activity function).
To adjust the brightness of the multi-
function meter displays and tachometer
1. Turn the key to “OFF”.
2. Push and hold the “SELECT” but-
ton.
3. Turn the key to “ON”, and then re-
lease the “SELECT” button after
five seconds.
4. Push the “RESET” button to select
the desired brightness level.
5. Push the “SELECT” button to con-
firm the selected brightness level.
The control mode changes to the
shift timing indicator light activity
function.
To set the shift timing indicator light ac-
tivity function
1. Push the “RESET” button to select
one of the following indicator light
activity settings:
●
The indicator light will stay on
when activated. (This setting
is selected when the indicator
light stays on.)
1. Display brightness
2. Shift timing indicator light activation/deacti-
vation
3. Shift timing indicator light
U2C010E0.book Page 9 Wednesday, October 26, 2005 10:19 AM
Summary of Contents for YZFR6V(C)
Page 1: ...2C0 28199 10 YZFR6V C OWNER S MANUAL LIT 11626 19 78 ...
Page 2: ...EAU10041 U2C010E0 book Page 1 Wednesday October 26 2005 10 19 AM ...
Page 111: ...CONSUMER INFORMATION 9 8 9 U2C010E0 book Page 8 Wednesday October 26 2005 10 19 AM ...
Page 116: ...PRINTED IN JAPAN 2005 11 3 6 1 CR E PRINTED ON RECYCLED PAPER YAMAHA MOTOR CO LTD ...
