PERIODIC MAINTENANCE AND MINOR REPAIR
6-23
6
evenly from side to side. Properly
adjust the suspension for your load,
and check the condition and pres-
sure of your tires. NEVER OVER-
LOAD YOUR VEHICLE. Make sure
that the total weight of the cargo, rid-
er, passenger, and accessories
(cowling, saddlebags, etc. if ap-
proved for this model) does not ex-
ceed the maximum load of the
vehicle. Operation of an overloaded
vehicle could cause tire damage, an
accident, or even injury.
Tire inspection
Always check the tires before operating
the motorcycle. If a tire tread shows
crosswise lines (minimum tread depth),
if the tire has a nail or glass fragments
in it, or if the sidewall is cracked, con-
tact a Yamaha dealer immediately and
have the tire replaced.
WARNING
EWA10580
●
It is dangerous to ride with a
worn-out tire. When a tire tread
begins to show crosswise lines,
have a Yamaha dealer replace
the tire immediately.
●
The replacement of all wheel-
and brake-related parts, includ-
ing the tires, should be left to a
Yamaha dealer, who has the
necessary professional knowl-
edge and experience.
Tire information
This motorcycle is equipped with cast
wheels and tubeless tires with valves.
WARNING
EWA10480
●
The front and rear tires should
be of the same make and de-
sign, otherwise the handling
characteristics of the motor-
cycle cannot be guaranteed.
●
After extensive tests, only the
tires listed below have been ap-
proved for this model by
Yamaha Motor Co., Ltd.
1. Tire sidewall
2. Tire wear indicator
3. Tire tread depth
Minimum tire tread depth (front and
rear):
1.0 mm (0.04 in)
1. Tire air valve
2. Tire air valve core
3. Tire air valve cap with seal
U4C811E0.book Page 23 Thursday, June 7, 2007 2:38 PM
Summary of Contents for YZFR1X(C)
Page 1: ...4C8 28199 11 YZFR1X C OWNER S MANUAL LIT 11626 21 41 ...
Page 2: ...EAU10041 U4C811E0 book Page 1 Thursday June 7 2007 2 38 PM ...
Page 117: ...U4C811E0 book Page 3 Thursday June 7 2007 2 38 PM ...
Page 118: ...PRINTED IN JAPAN 2007 06 3 0 1 CR E PRINTED ON RECYCLED PAPER YAMAHA MOTOR CO LTD ...