Instrument an
d
control functions
4-5
4
TIP
When the vehicle is turned on, this light
should come on for a few seconds and
then go off. If the light does not come
on, or if the light remains on, have a
Yamaha dealer check the vehicle.
Transpon
d
er interference
If the immobilizer system indicator light
flashes in the pattern, slowly 5 times
then quickly 2 times, this could be
caused by transponder interference. If
this occurs, try the following.
1. Make sure there are no other im-
mobilizer keys close to the main
switch.
2. Use the code re-registering key to
start the engine.
3. If the engine starts, turn it off, and
try starting the engine with the
standard keys.
4. If one or both of the standard keys
do not start the engine, take the
vehicle and all 3 keys to a Yamaha
dealer to have the standard keys
re-registered.
EAU92981
Multi-function meter unit
The multi-function meter unit is also
equipped with a display brightness and
shift timing indicator light settings
mode.
WARNING
EWA12423
Be sure to stop the vehicle
b
efore
makin
g
any settin
g
chan
g
es to the
multi-function meter unit. Chan
g
in
g
settin
g
s while ri
d
in
g
can
d
istract the
operator an
d
increase the risk of an
acci
d
ent.
EAU92991
TIP
The multi-function meter is controlled
using the “SEL/RES” switch. 4-13 for
more information.
EAU93001
Switchin
g
the
d
isplay units
The display units can be switched be-
tween kilometers and miles. To switch
the display units, set the multi-funtion
display to the odometer or a tripmeter,
and then hold the “SEL” switch until
the display units change.
1. Transmission gear display
2. Speedometer
3. Tachometer
4. Fuel meter
5. Clock
6. Multi-function display
7. Quick shifter indicator “QS” (if equipped)
1. “SEL/RES” switch
1
2
3
4
5
6
7
1
1
1
UBEB20E0.book Page 5 Monday, September 6, 2021 11:24 AM
