Yamaha YZF600RW, Owner'S Manual, Page: 50 / 105

PERIODIC MAINTENANCE AND MINOR REPAIR
6-9
6
To install the cowling
1. Connect the turn signal light lead
connectors.
2. Place the cowling in the original
position, and then install the
screws.
EAU19050
Cowling B
To remove the cowling
1. Remove the seat. (See page 3-9.)
2. Remove the screws, and then pull
the cowling off as shown.
NOTE:
Pull the cowling up, then back to re-
move it.
To install the cowling
1. Place the cowling in the original
position, and then install the
screws.
2. Install the seat.
EAU19021
Cowling D
To remove the cowling
1. Remove the seat and cowling B.
(See pages 3-9 and 6-8.)
2. Remove the grab bar by removing
the bolts.
3. Remove the screw, and then pull
the cowling off as shown.
To install the cowling
1. Place cowling D in the original po-
sition, and then install the screw.
2. Install the grab bar by installing the
bolts.
3. Install cowling B and the seat.
1. Turn signal light lead connector 1. Screw
1. Bolt
2. Screw
U5AH1BE0.book Page 9 Thursday, May 18, 2006 3:45 PM