Yamaha YZF600RT, Owner'S Manual

Page: 50 / 105

PERIODIC MAINTENANCE AND MINOR REPAIR
6-9
6
To install the cowling
1. Connect the turn signal light lead
connectors (and, for the left-side
cowling, also the auxiliary light
lead coupler).
2. Place the cowling in the original
position, and then install the
screws.
EAU19050
Cowling B
To remove the cowling
1. Remove the seat. (See page 3-9.)
2. Remove the screws, and then pull
the cowling off as shown.
NOTE:
Pull the cowling up, then back to re-
move it.
To install the cowling
1. Place the cowling in the original
position, and then install the
screws.
2. Install the seat.
EAU19020
Cowling D
To remove the cowling
1. Remove the seat and cowling B.
(See pages 3-9 and 6-8.)
2. Remove the grab bar by removing
the bolts.
3. Remove the screw, and then pull
the cowling off as shown.
To install the cowling
1. Place the cowling in the original
position, and then install the
screw.
2. Install the grab bar by installing the
bolts.
3. Install the cowling and the seat.
1. Auxiliary light lead coupler (left side)
2. Turn signal light lead connector 1. Screw
1. Bolt
2. Screw
U5AH19E0.book Page 9 Thursday, May 13, 2004 4:23 AM