Perio
d
ic maintenance an
d
a
d
justment
6-12
6
3. If the coolant is at or below the mi-
nimum level mark, remove the left
side cowling and coolant reservoir
cover to access the coolant reser-
voir.
4. Remove the coolant reservoir cap,
add coolant to the maximum level
mark, and then install the reservoir
cap.
WARNING! Remove only
the coolant reservoir cap. Never
attempt to remove the ra
d
iator
cap when the en
g
ine is hot.
[EWA15162]
NOTICE:
If coolant is not
availa
b
le, use
d
istille
d
water or
soft tap water instea
d
. Do not
use har
d
water or salt water
since it is harmful to the en
g
ine.
If water has
b
een use
d
instea
d
of coolant, replace it with cool-
ant as soon as possi
b
le, other-
wise the coolin
g
system will not
b
e protecte
d
a
g
ainst frost an
d
corrosion. If water has
b
een
a
dd
e
d
to the coolant, have a
Yamaha
d
ealer check the anti-
freeze content of the coolant as
soon as possi
b
le, otherwise the
effectiveness of the coolant will
b
e re
d
uce
d
.
[ECA10473]
5. Install the coolant reservoir cover.
6. Install the left side cowling by in-
stalling the bolts.
TIP
Fit the projections on the cowling into
the slots as shown.
1. Left side cowling
2. Bolt
1. Bolt
2. Coolant reservoir cover
2
1
2
2
2
1
1. Coolant reservoir cap
Coolant reservoir capacity (up to
the maximum level mark):
0.25 L (0.26 US qt, 0.22 Imp.qt)
1
UBR5E0E0.book Page 12 Wednesday, July 5, 2017 11:10 AM