Yamaha YZF-R1, Kit Manual

Page: 9 / 77

– 6 –
3. Wire Harness Set (2CR-F2590-70)
Parts List
No. PART No. PART NAME Q'TY REMARKS
1 2CR-82590-70 WIRE HARNESS ASSY. 1 MAIN HARNESS
° 2 2CR-82386-70 WIRE, SUB-LEAD 1 TH INJECTOR
° 3 2CR-82318-70 WIRE, SUB-LEAD 1 AC INJECTOR
° 4 2CR-82309-70 WIRE, SUB-LEAD 1 IGNITION COIL
° 5 2CR-8231Y-70 WIRE, LEAD 1 FUEL PUMP
° 6 2CR-83553-70 WIRE, LEAD 1 METER
7
2CR-2128A-70 BRKT., REGULATOR 1 1
* 8 90480-13003 GROMMET 2
*
9 90560-06201 SPACER 2
* 10 90111-06051 BOLT, HEX. SOCKET BUTTON 2
* 11 95607-06200 NUT, U FLANGE 2
12 2CR-2161E-70 BRKT.,4 1
* 13 90338-06018 PLUG 3
* 14 120-82131-00 BAND, BATTERY 1
* 15 90111-06051 BOLT, HEX. SOCKET BUTTON 1
16 2CR-2161G-70 BRKT.,6 1
* 17 14B-8183G-01 CORD COMP. 1
This wire harness is weight-saved by doing
away with connecting wires for lights.
NOTICE
•
Do not remove the AC generator but
leave it to function. Use on the battery
alone will make the machine unable to
run in a short time.
•
This wire harness only works when
used in combination with the ECU
(2CR-8591A-70, 71) of the kit.
•
Using the KIT ECU disables the ABS
function of the brake, but do not
remove the Hydraulic unit assy. and
connect it to the wire harness of the
kit. Without this connection, any
computerized controls will not work.
TIP
If the E-SD (STD steering damper) is not
used, removing its coupler will pose no
problem.
No. PART No. PART NAME Q'TY REMARKS
20 2KS-82509-70 WIRE, SUB-LEAD 1 SCU
WIRE, SUB-LEAD
Parts List
This wire harness is for mounting the KIT
harness to a vehicle with the Electric racing
suspension (ERS) function.
NOTICE
•
Before using the KIT ECU for the first
time, use YMS to perform writing of
the base map.
•
Remove the coupler of the main switch
before starting assembling work.