Instrument an
d
control functions
4-13
4
turn of the adjusting nut, dis-
tance A is changed by 1.5
mm (0.06 in).
6. Tighten the locknut to the speci-
fied torque.
NOTICE:
Always
ti
g
hten the locknut a
g
ainst the
a
d
justin
g
nut, an
d
then ti
g
hten
the locknut to the specifie
d
torque.
[ECA10122]
7. Install the air filter joint in its origi-
nal position, and then tighten the
clamp screw and clamp bolt.
TIP
Align the projection on the air filter joint
with the projection on the frame guide.
8. Place the left side panel in its orig-
inal position, and then install the
bolt.
9. Install the seat.
Re
b
oun
d
d
ampin
g
force
Turn the adjusting screw in direction (a)
to increase the rebound damping for-
ce.
Turn the adjusting screw in direction (b)
to decrease the rebound damping for-
ce.
To set the rebound damping force, turn
the adjuster in direction (a) until it
stops, and then count the clicks in di-
rection (b).
1. Distance A
Sprin
g
preloa
d
:
Minimum (soft):
Distance A = 218.5 mm (8.60 in)
Standard:
Distance A = 215.0 mm (8.46 in)
Maximum (hard):
Distance A = 202.0 mm (7.95 in)
Ti
g
htenin
g
torque:
Locknut:
30 N·m (3.0 kgf·m, 22 lb·ft)
1
1. Frame guide
2. Air filter joint
3. Projection
1. Rebound damping force adjusting screw
1
3
2
1
(a)
(b)
UB4B11E0.book Page 13 Tuesday, February 19, 2019 1:10 PM
