INSTRUMENT AND CONTROL FUNCTIONS
4-2
4
EAU41265
Brake lever
The brake lever is located on the right
side of the handlebar. To apply the
front brake, pull the lever toward the
throttle grip.
The brake lever is equipped with a
brake lever position adjusting bolt. Ad-
just the distance between the brake le-
ver and the throttle grip as follows.
1. Slide the rubber cover toward the
end of the brake lever.
2. Loosen the locknut.
3. While holding the lever pushed
away from the throttle grip, turn
the adjusting bolt in direction (a) to
increase the distance, and in di-
rection (b) to decrease it.
4. Tighten the locknut.
5. Slide the rubber cover to its origi-
nal position.
EAU12942
Brake pe
d
al
The brake pedal is on the right side of
the motorcycle. To apply the rear
brake, press down on the brake pedal.
1. Rubber cover
2. Brake lever
3. Locknut
4. Brake lever position adjusting bolt
5. Distance between brake lever and throttle
grip
1
4
3
(a)
(b)
2
5
Distance
b
etween the
b
rake lever
an
d
the throttle
g
rip:
Minimum (shortest):
76 mm (2.99 in)
Standard:
95 mm (3.74 in)
Maximum (longest):
97 mm (3.82 in)
1. Brake pedal
U1SN82E0.book Page 2 Friday, June 7, 2013 3:51 PM
