Instrument an
d
control functions
4-9
4
EAU84381
A
d
justin
g
the front fork
WARNING
EWA10181
Always a
d
just
b
oth fork le
g
s equally,
otherwise poor han
d
lin
g
an
d
loss of
sta
b
ility may result.
This front fork is equipped with re-
bound damping force adjusting screws
and compression damping force ad-
justing screws.
NOTICE
ECA10102
To avoi
d
d
ama
g
in
g
the mechanism,
d
o not attempt to turn
b
eyon
d
the
maximum or minimum settin
g
s.
Re
b
oun
d
d
ampin
g
force
1. Remove the protector.
2. To increase the rebound damping
force and thereby harden the re-
bound damping, turn the adjusting
screw on each fork leg in direction
(a). To decrease the rebound
damping force and thereby soften
the rebound damping, turn the ad-
justing screw on each fork leg in
direction (b).
3. Install the protector.
TIP
Install the protector so that the side
with the notch is facing rearward.
TIP
Although a damping force adjuster
may click beyond the stated minimum
settings, such adjustments are ineffec-
tive and may damage the suspension.
1. Protector
1
1. Rebound damping force adjusting screw
Re
b
oun
d
d
ampin
g
settin
g
:
Minimum (soft):
20 click(s) in direction (b)*
Standard:
10 click(s) in direction (b)*
Maximum (hard):
1 click(s) in direction (b)*
* With the adjusting screw fully
turned in direction (a)
1. Notch
1
1
(a)
(b)
(a)
(b)
1
UBR880E0.book Page 9 Friday, February 16, 2018 8:32 AM
