Yamaha YZ250 2001, Repair Manual, Page: 36 / 39

Chapter IV Title Of Manual
4.2 Break Test
The break test will assure you that your front break is in working order.
How to Perform the Break Test

Step1: Start by performing the spin test
o
D

Step2: Grab the front break lever located on the right side of the handle
bars.

Step3: Interpret results:
o
If the wheel keeps moving, then the disc did not get placed correctly
inside the front breaking caliper.
o
If the wheel slows but does not stop immediately, then check your
brake pads for wear.
o
If the wheel stops abruptly, then the front breaks were installed
correctly.
 Step1: To perform the test you must first make sure that your front tire is
off of the ground.

Step2: Begin to rotate the front wheel in either direction.

Step3: Interpret your results:
o
Tire is wobbling—
Either rim is bent or the axle was not reassembled properly.
o
Tire swings back and forth to a stop—
Something in the tire is off balance.

This image shows how the disc
break (roader) should fit within the
caliper.
