Yamaha YZ 2020 Series, Owner'S Service Manual

Page: 117 / 376

GENERAL CHASSIS
4-3
EAM30016
REMOVING THE SEAT
TIP
The fuel tank cap cover and the seat are coupled
with each other with a plastic band.
When removing the seat, always remove the
fuel tank cap cover beforehand.
1. Remove:
•
Fuel tank cap cover “1”
Refer to “FUEL TANK CAP” on page 1-24.
2. Remove:
• Seat “1”
EAM30371
REMOVING THE NUMBER PLATE
1. Remove:
•
Bolt (number plate)
• Number plate “1”
TIP
•
The projection “a” is inserted into the band of
the number plate. Pull the band off the projec-
tion before removal.
• Remove the clutch cable “2” from the cable
guide “b” on the number plate.
• The projection “c” on the lower bracket is in-
serted into the number plate. Remove the
number plate by pulling it off the projection.
•
When installing the number plate, insert the
projection on the number plate into the hole in
the upper side of the band.
EAM30458
INSTALLING THE AIR SCOOP
1. Install:
•
Air scoop (left “1”/right)
TIP
After inserting the projection “a” on the air scoop
(left/right) into the hole “b” in the air filter case, in-
serting the grooves “c” into the ribs “d” of the air
filter case, and inserting the projection “e” into
the slot “f” in the air filter case, install the air
scoop and secure it with the bolts.
1
1
1
2
a
b
c
a
1
c
d d d
e
ff
a
f
b