Yamaha YZ 2019 Series, Owner'S Service Manual

Page: 205 / 398

ENGINE REMOVAL
5-6
shaft of similar diameter into the other side of the
swingarm to support it.
2. Remove:
•
Engine “1”
From the right side.
TIP
•
Make sure that the couplers, the hoses, and
the cables are disconnected.
•
Lift up the engine, and remove this from its low-
er part toward the right of the chassis.
EAM30163
CHECKING THE SILENCER AND EXHAUST
PIPE
1. Check:
• Gasket “1”
Damage

Replace.
EAM30373
CHANGING THE SILENCER FIBER
1. Remove:
• Bolt “1”
• Silencer body “2”
NOTICE
ECA25800
Do not hit the silencer stay “a” as it may do
damage to the silencer.
TIP
Remove the inner pipe while holding the silencer
in place with a vise etc.
2. Remove:
• Rivet “1”
•
Silencer cap “2”
1
1
1
a
1
2