manualshive.com logo in svg

Yamaha YXZ10YEXR, Owner'S Manual

Share
Download
Yamaha YXZ10YEXR Owner'S Manual Download Page 79

5-49

5

2. Turn the headlights off. (See page 5-19.)
3. Open the auxiliary DC jack cap.
4. Make sure the accessory is off.
5. Insert the accessory power plug.
6. Turn the accessory on.

TIP

Turn off the accessory before plugging in-
to/unplugging from the jack.

When the auxiliary DC jack is not being
used, cover it with the cap.

 

NOTICE

ECB02251

Do not use accessories requiring more
than the stated maximum capacity. Do-
ing so may overload the circuit and
cause the fuse to blow.

If accessories are used while the head-
lights are on and/or without the engine
running, the battery may discharge.

Do not use an automotive cigarette light-
er or other accessories with a plug that
gets hot, because the jack can be dam-
aged.

 

EBU39461

DC connectors

This vehicle is equipped with additional wiring
and DC connector(s) for the installation of op-
tional electric accessories.
Consult a Yamaha dealer for more informa-
tion regarding the location and capacity of the
DC connector(s) and about what accessories
are capable of being installed.

UBDW11E0.book  Page 49  Wednesday, June 7, 2023  11:11 AM

Summary of Contents for YXZ10YEXR































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands