Yamaha YXZ1000ET Owner'S Manual Download Page 55 | Manualshive

Page: 55 / 212

background image

5-23

5



If you drive the vehicle with the parking
brake engaged, a buzzer will sound.

EBU36633

YCC-S system

This vehicle is equipped with the Yamaha
Chip Controlled-Shift system (YCC-S) with
AUTO DOWNSHIFT.
YCC-S allows the driver to operate the man-
ual transmission without having to operate
the clutch. AUTO DOWNSHIFT automatically
shifts the transmission into first gear when
coming to a stop under normal conditions.
The transmission is operated using the drive
select lever and the shift paddles. The drive
select lever is used to shift the transmission
into forward drive (first gear), neutral, and re-
verse gear. The shift paddles are used to shift
through the forward gears.
When the drive select lever or shift paddles
are moved, a signal is sent to the MCU (motor
control unit) which disengages the clutch, the
gear shift is made, and then the clutch is re-

engaged once the engine is running at proper
speed. Clutch engagement is controlled by
the MCU according to engine speed and oth-
er driving conditions.

TIP



This is not an automatic transmission, only
the clutch system is automatic.



The gears must be shifted by the driver, ex-
cept when AUTO DOWNSHIFT shifts the
transmission into first gear.



See page 7-3 for more information on shift-
ing.

UBAS7AE0.book Page 23 Wednesday, June 19, 2019 11:51 AM

«
...
53
54
55
56
57
...
»

Summary of Contents for YXZ1000ET





















































































































































































































Reviews:

No comments

Related manuals for YXZ1000ET

Onslaught 550 EFI 4X4 EPS

Brand: Bad Boy Pages: 67

Brand: E-Z-GO Pages: 212

GRIZZLY 700 2014

Brand: Yamaha Pages: 176

Brand: Yamaha Pages: 174

Brand: Land Pride Pages: 50

Brand: SAF-HOLLAND Pages: 20

Brand: Trolla Pages: 11

MAVERICK X3 Series 2017

Brand: Can-Am Pages: 155

Brand: Buffalo Tools Pages: 2

Brand: Recon Pages: 102

Off Road Utility Vehicle 4430

Brand: Bush Hog Pages: 82

Brand: J&J Amusements Pages: 272

Brand: Toyhouse Pages: 6

Brand: ACG Pages: 97

Brand: E-Z-GO Pages: 74

Brand: Baja motorsports Pages: 8

Brand: Humbaur Pages: 36

Raider mini 90S

Brand: Dazon Pages: 60

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands