manualshive.com logo in svg

Yamaha YXZ 1000R YXZ10YMXN, Owner'S Manual, Page: 75 / 204

Share
Download
Yamaha YXZ 1000R YXZ10YMXN Owner'S Manual Download Page 75

5-44

5

2. Turn the headlights off. (See page 5-16.)
3. Open the auxiliary DC jack cap.
4. Make sure the accessory is off.
5. Insert the accessory power plug.
6. Turn the accessory on.

TIP

Turn off the accessory before plugging in-
to/unplugging from the jack.

When the auxiliary DC jack is not being
used, cover it with the cap.

 

NOTICE

ECB02251

Do not use accessories requiring more
than the stated maximum capacity. Do-
ing so may overload the circuit and cau-
se the fuse to blow.

If accessories are used while the head-
lights are on and/or without the engine
running, the battery may discharge.

Do not use an automotive cigarette light-
er or other accessories with a plug that
gets hot, because the jack can be dam-
aged.

 

UB5J13E0.book  Page 44  Thursday, December 16, 2021  12:52 PM

Summary of Contents for YXZ 1000R YXZ10YMXN













































































































































































































Reviews:

No comments